Beryllium tembaga buluh main pemasangan kaedah

Beryllium copper reed (BeCu Fingerstock) has good compression resistance, resilience and corrosion resistance, and provides a good broadband electromagnetic shielding effect. For easy installation, the installation form of metal reed has both slotted, carded, glued, track, crimped and riveted, etc., please refer to the following information for specific installation diagrams.
1. Slotted installation: open the holes required for installing the product on the panel. The groove length is determined by the length of the beryllium copper reed.
The product buckle slot and edge mount symmetrical finger use single or double fingers for easy installation in both directions.

2. Snap-on mounting: It can be installed firmly by the friction between the shielding material and the structural parts, and the built-in "D" and "T" barbs facilitate safer connection
3. Pelekat pemasangan: the reed comes with 3M467 pressure-sensitive adhesive, the product can be used in ambient temperature from {-55 degree to 230 degree , with high tear strength and shear strength and good solvent resistance, the pressure-sensitive adhesive is specially used to stick to the metal chassis, with strong bonding ability, need to add a certain pressure, is the ideal choice for metal shell and elektronik shell shielding strip;
The main adhesive used adhesive beryllium copper reeds in our company are: 3M company 9469 tape, conductive tape: 3M9485, etc.;
4. Orbital installation: generate a cross-section to form a track under the convex and concave parts of the structural parts themselves, or add another material to generate a cross-section to form a track